background image

22

 

AC/DC Current Probe Models MR461 and MR561

Limited Warranty

The Model MR461 and MR561 are warranted to the owner for a period of one 

year from the date of original purchase against defects in manufacture. This 

limited warranty is given by AEMC

®

 Instruments, not by the distributor from 

whom it was purchased. This warranty is void if the unit has been tampered 

with, abused or if the defect is related to service not performed by AEMC

®

 

Instruments. 

Full warranty coverage and product registration is available on our 

website at 

www.aemc.com/warranty.html

.

Please print the online Warranty Coverage Information for your records.
What AEMC

®

 Instruments will do:

If a malfunction occurs within the one-year period, you may return the instrument 

to us for repair, provided we have your warranty registration information on file 

or a proof of purchase. AEMC

®

 Instruments will, at its option, repair or replace 

the faulty material.

Warranty Repairs

What you must do to return an Instrument for Warranty Repair: 

First,  request  a  Customer  Service Authorization  Number  (CSA#)  by  phone 

or by fax from our Service Department (see address below), then return the 

instrument along with the signed CSA Form. Please write the CSA# on the 

outside of the shipping container. Return the instrument, postage or shipment 

pre-paid to:

Ship To:

  Chauvin Arnoux

®

, Inc. d.b.a. AEMC

®

 Instruments

 

15 Faraday Drive • Dover, NH 03820 USA

 

Phone: (800) 945-2362  (Ext. 360)

 

 

(603) 749-6434  (Ext. 360)

 

Fax:  (603) 742-2346 or (603) 749-6309

 

E-mail: [email protected]

Caution:

 To protect yourself against in-transit loss, we recommend you insure 

your returned material.

NOTE: You must obtain a CSA# before returning any instrument.

www.

ShopAEMC

.ca

Shop for AEMC products online at:

1.800.561.8187

Summary of Contents for MR461





























Reviews: