Clamp-on Multimeter Model F03
7
2.3
Rotary Switch Functions
OFF
Deactivation of the clamp, activation is ensured by
selection of other functions
Measurement of DC and AC voltages (rms value)
Continuity measurement. Test resistance and semi-conductor
by pressing the yellow button.
Measurement of DC and AC amperes (rms value)
T°
Measurement of the internal or external temperature, accord-
ing to the presence or absence of a sensor, in °C or °F
2.4
Command Buttons
The buttons are capable of 3 types of action:
Short pressure:
<1.3 s, valid if the button pressure is detected.
Long pressure:
>1.3 s, gives access to a measurement or operating
mode. Holding or releasing the button has no effect.
Held pressure:
Gives access to a measurement or operating mode
and remains in this mode as long as pressure is held. Releasing the
button returns you to the previous mode.
2.5
Hold Button Primary Functions
2.5.1 DISPLAY LOCK
Short-press the
HOLD
button to freeze/lock the display. Press
again to unlock.
2.5.2 PRESELECTING MIN/MAX MODE
Short-press the
HOLD
button, then the
MIN/MAX
button to prese
-
lect the MIN/MAX mode. Press the
HOLD
button again to make
the MIN/MAX mode effective.
(e.g., use this function to preselect the MIN/MAX mode to prevent
unwanted or mistaken integration of MIN/MAX values.)
Summary of Contents for F03
Page 1: ...F03 E N G L I S H User Manual CLAMP ON MULTIMETER...
Page 29: ...NOTES...
Page 30: ......
Page 31: ......
