7
7-5-2 Electromagnetic compatibility : conforms to CE
Q
Emission (EN 50081-1)
Q
Immunity (EN 50082-1)
7-5-3 Mechanical protection
Q
Degree of watertightness (IEC 529) : protection index IP 40
8 - TO ORDER
Use the designations and references below.
C.A 5205
....................................................................... Cat#
2116.73
Supplied with its shockproof case, a pair of leads with probes attached,
two 1.5 V "AA" batteries and this user's manual
Accessories and spares
Q
AC current probe model MN 251 (200 A AC) ........... Cat#
2115.77
Q
AC current probe model MD 303 (500 A AC) ........... Cat#
1201.21
Q
AC current probe model SR 652 (1000 A AC) .......... Cat#
2113.46
Q
AC/DC current probe
model MR 410 (400 A AC / 600 A DC) ..................... Cat#
1200.70
Q
Amp
FLEX
model 1000-24-1-1(1000 A AC) ................... Cat#
2112.39
Q
Replacement leads ................................................... Cat#
2118.66
Q
Soft carrying case ..................................................... Cat#
2118.65
Q
Replacement shockproof case .................................. Cat#
2980.15
9 - WARRANTY
Our guarantee is applicable for
three years
after the date on which
the equipment is made available (copy available on request).
10 - MAINTENANCE
For maintenance, use only specified spare parts.
The manufacturer will not be held responsible for any
accident occurring following a repair done other than by
its After Sales Service or approved repairers.
10-1 Replacing the batteries
The multimeter must be disconnected from any electrical
source.
Q
Place the selector switch on the " OFF " position.
Q
Unscrew the tool release screws and remove the lower half of the
case.
Q
Replace the dead batteries by two " AA " 1.5 V batteries (type LR6
or R6)
Q
Refit the lower half of the case