4
Clamp-On Ground Tester Model 6418
Thank you for purchasing the AEMC Clamp-On Ground Tester Model
6418.
For best results from your instrument and for your safety, read the
enclosed operating instructions carefully and comply with the
precautions for use. These products must be only used by qualified and
trained users.
WARNING, risk of DANGER! The operator must refer to these
instructions whenever this danger symbol appears.
Equipment is protected by double insulation.
Battery.
Application or withdrawal authorized on conductors carrying
dangerous voltages. Type A current sensor per IEC 61010-2-
032.
Useful information or tip to read.
The product has been declared recyclable after analysis of its
life cycle in accordance with the ISO14040 standard.
Guarantees conformity with European directives and with
regulations covering EMC.
In the European Union, the product must undergo selective
disposal for the recycling of electric and electronic material, in
compliance with Directive WEEE 2002/96/EC.
Definition of Measurement Categories (CAT)
CAT IV
Measurement category IV corresponds to measurements taken
at the source of low-voltage installations.
Example:
power feeders, counters and protection devices.
CAT III
Measurement category III corresponds to measurements on
building installations.
Example:
distribution panel, circuit-breakers, machines or fixed
industrial devices.
CAT II
Measurement category II corresponds to measurements
taken on circuits directly connected to low-voltage
installations.
Example:
power supply to domestic electrical appliances
and portable tools.
