Simple Logger
®
II (Bluetooth Edition) Series
31
MODEL
L264
ELECTRICAL
Channels
Four
Input
Five Recessed Banana Jacks
Range
0 to 600V
AC/DC
Resolution
0.1V
Accuracy
(50/60Hz)
0 to 5V unspecified
5 to 50V: ±(0.5% of R 1V)
50 to 600V: ±(0.5% of R 0.5V)
Maximum Input Voltage***
1.2 x 600V
Input Impedance
16M
W
Sample Rate
64 samples/cycle
Storage Rate
Programmable from 125ms to 1 per day
Storage Modes
Start/Stop, FIFO and Extended Recording Mode
*
(XRM
™
), Store on Alarm
Recording Length
15 minutes to 8 weeks, programmable using DataView
®
Memory
1,000,000 measurements (2MB).
Recorded data is stored in non-volatile memory and retained
even if battery is low or removed.
Communication
Bluetooth (Class 2)
Power Source**
4x1.5V C-cell alkaline batteries
Battery Life
>200hrs at 125ms up to 180 days
(dependent on storage rate/recording length)
MECHANICAL
Dimensions
5.904 x 5.904 x 3.568" (150 x 150 x 91mm) w/o Sensor
Weight (with battery)
2.1 lbs (0.95kg)
Cover/Case
Cover: UL94-V0 / Case: UL94-5VB
Vibration
IEC 68-2-6 (1.5mm, 10 to 55Hz)
Shock
IEC 68-2-27 (30G)
Drop
IEC 68-2-32 (1m)
ENVIRONMENTAL
Operating Temperature
14° to 122°F (-10° to 50°C)
Storage Temperature
-4° to 140°F (-20° to 60°C)
Relative Humidity
Up to 85% at 95°F (35°C), Non-condensing
Altitude
2000m
SAFETY & ELECTRO-MAGNETIC COMPATIBILITY
Safety Rating
EN61010-1; 600V CAT IV, 1000V CAT III; Pollution Degree 2
Protection Degree
IP50 (cover closed)
Electro-Magnetic
Compatibility
EN 61326-1; 07/1997 (+A1 10/1998, +A2 09/2001, +A3 05/2004)
CE Approved
Pending
*This unique recording mode provides the opportunity to continuously record over long periods of time by reducing the storage
resolution of the stored data and maintaining matching resolution for the newest data. Each time the memory fills up using
XRM
™
, every other of the oldest stored samples is discarded making room for newer samples. This process continues until the
recording is manually stopped.
**A memory backup capacitor provides backup power while batteries are being changed. This backup capacitor will maintain the
instrument for up to 10 sec. without batteries installed. After 10 seconds the date and time will need to be reset (data and configu-
ration will be maintained). If the unit is connected to DataView
®
via a PC, the battery life is 100 hours regardless of the storage rate.
***Voltages beyond this range may damage the instrument.
