Model PEL 102/103
Battery Replacement Procedure
Cat. #2137.81
3
Battery Replacement Procedure
To replace the battery in the PEL 102/103, disconnect the
instrument from all electrical sources and sensor probes. Then
follow these steps:
1. Apply tape to the control buttons on the PEL front panel (see
Figure 1). This tape will ensure that the buttons remain in
place when you remove the PEL’s front cover from the back
cover.
2. Tape the PEL’s endplates to the back cover (see Figure 2).
This helps to ensure that the endplates remain attached to the
back cover when you remove the front cover.
Figure 1
Figure 2
Summary of Contents for PEL 102
Page 11: ...NOTES ...