28
Data Logger Model DL913 & DL914
If the instrument has been connected previously:
1. In the Data Logger Network, locate the instrument’s name.
If a green check mark is next to the name, the instrument is connected, so
no additional steps are needed.
If a red X is next to the name, the instrument is not connected, and you will
need to continue with the following steps.
2. Select the instrument in the Data Logger Network.
3. Click
Instrument
in the menu bar.
4. Click
Reconnect Instrument
from the drop-down list.
NOTE:
For more information about DataView
and the Control Panel,
consult the Help system that comes with the product.
5.3 REMOTE USER INTERFACE
The remote user interface is available via PC, tablet, or Android phone and
allows you to view information about the device.
1. Enable Wi-Fi on the device.
The remote user interface can work with an access point Wi-Fi link
or a
router Wi-Fi link .
The remote user interface does not work with an IRD server link.
2. On a PC, connect as indicated in § 5.3.2.
On a tablet or smartphone, share a Wi-Fi connection.
3. In a web browser, enter http://IP_address_instrument.
For a Wi-Fi access point connection, enter http://192.168.2.1
For a Wi-Fi router connection, enter the address indicated in the information
menu (see § 4.2).
In the Wi-Fi tab, you can view and edit the instrument’s SSID, Password, and
IP address.
