INSTRUMENT CONFIGURATION
In addition to setting the instrument’s clock, other basic setup tasks include:
Enabling Bluetooth (can be done on the instrument or via DataView)
Setting measurement units to °F or °C (can be done on the instrument or via
DataView)
Changing the Auto OFF interval (requires DataView)
Detailed information for configuring the instrument via the DataView Data Logger Control
Panel is available by pressing the
Help
button.
Enabling Bluetooth
Long press (>2 seconds) the
button to enable/disable Bluetooth.
Selecting Temperature Units
Press
to toggle between °C and °F.
OPERATION
Making Measurements
1. Remove the cap protecting the sensor.
2.
If the instrument is OFF, press and hold down the
button until it turns ON.
The instrument displays the time, then the relative humidity (top) and
temperature (bottom) measurements. (The time is set via DataView.)
3.
Press the
button to change the displayed measurements. The first press
displays dew point (top) and relative humidity (bottom). A second press shows
dew point and temperature. A third press restores the original measurements
.
4.
To change temperature units, press and hold down
until the desired unit
(°C or °F) is displayed
4
