AA36-100 Digital ICS Tie Line Adapter
SM58 Installation and Operation Manual
April 15, 2012 Rev: 5.00
Page 2-2
ENG-FORM: 805-0100.DOTX
CONFIDENTIAL AND PROPRIETARY TO ANODYNE ELECTRONICS MANUFACTURING CORP.
2.3.3
Cabling and Wiring
All unshielded wire should be Tefzel MIL-M-22759 or equivalent. For shielded wire applications, use
Tefzel MIL-C-27500 shielded wire with solder sleeves (for shield terminations) to make the most compact
and easily terminated interconnect. Follow the wiring diagrams in Section 2.6 as required.
To prevent system failure or inadequate equipment protection, supply power from a dedicated 1.0 A
circuit breaker.
2.3.4 Installation
Options
The AA36-100 can be set to support the following installation configurations:
NAT
or
SuperNAT
bi-
directional ICS tie to ‘universal’ bi
-directional (e.g. dB systems, Gemelli, Andrea,
etc.)
NAT to SuperNAT bi-directional tie lines
NAT
or
SuperNAT
bi-
directional to ‘universal’ unidirectional (e.g. mic and phones)
The PHONES source for the ‘universal’ unidirectional tie line may contain intercom and/or radio audio.
Verify that this information will be acceptable for connection to the new audio/intercom system (i.e. AEM
product) before proceeding with the planned installation.
The AA36-100 is designed for use with 4 different proprietary bi-directional tie lines. Each tie line has
unique voltage and impedance levels. Driving these proprietary tie lines with incorrect power levels may
damage the AA36-100 or the proprietary audio intercom system.
Utilizing solder sleeves, create up to 3 shield
pigtails in the wiring harness, as shown in the
Interconnect Diagram
(AA36\100\403-0, Rev
1.00 or higher). Each pigtail should be no more
than 3.0” long.
Note
:
The hood is a ‘two
-
piece’ unit, and is
assembled after the wiring is complete.
All wiring should be at least 24 AWG, except
power and ground lines, which should be at
least 20 AWG. Ensure that all ground
connections are clean and well secured.
Metal
Hood
Solder
Sleeves
These commodities, technology or software are controlled in accordance with the United States Export Administration Regulations, Export Classification
Control Number(ECCN) 7E994. When exporting, diversion contrary to U.S. law is prohibited.
