20
10/25/2016 - DOCUMENT NUMBER: 10-2500
© 2016 AEM Performance Electronics
AQ-1 DATA LOGGER
PN
Description
AQ-1 Input Type
30-51xx
Analog Display Gauges
Analog 1-8
30-41x0
Digital Wideband UEGO AFR Gauge
Analog 1-8
30-440x
"Classic" Digital Gauges
Analog 1-8
30-0300
X-Series Wideband UEGO AFR Gauge (LSU4.9)
Analog 1-8 / AEMnet
30-0301
X-Series Oil/Fuel Pressure Gauge 0 to 100psi / 0 to 7bar
Analog 1-8 / AEMnet
30-0302
X-Series Oil/Transmission/Water Temperature Gauge 100 to 300F / 40 to
150C
Analog 1-8 / AEMnet
30-0305
X-Series EGT Gauge 0 to 1800F / 0 to 1000C
Analog 1-8 / AEMnet
30-0306
X-Series Boost Gauge -30inHg to 35psi / -1 to 2.5bar
Analog 1-8 / AEMnet
30-0307
X-Series Oil Pressure Gauge 0 to 150psi / 0 to 10bar
Analog 1-8 / AEMnet
30-0308
X-Series Boost Gauge -30inHg to 60psi / -1 to 4bar
Analog 1-8 / AEMnet
30-0309
X-Series Boost/Fuel Pressure Gauge 0 to 15psi SAE Only
Analog 1-8 / AEMnet
30-0310
X-Series Inline Wideband UEGO AFR Controller (LSU4.9)
Analog 1-8 / AEMnet
30-0313
X-Series GPS Speedometer Gauge 0 to 160mph / 0 to 260kph
Analog 1-8 / AEMnet
30-2203
Vehicle Dynamics Module
Analog 1-8 / AEMnet
30-2340
4-Channel Wideband UEGO AFR Controller
Analog 1-8 / AEMnet
30-49xx
Wideband Failsafe / Wideband Flex Fuel Failsafe
Analog 1-8 / AEMnet
30-71xx
Infinity ECU (All firmwares)
AEMnet
30-xxxx
Series2 ECU / EMS-4
AEMnet
Mounting Drill Template
A drill template is provided to aid in determining mounting hole locations when mounting the AQ1 Data Logger. Before
drilling any holes, make sure the drill template is printed to the proper size. The two vertical lines on the drill template are
spaced one inch apart when the drill template is printed to the proper size. Verify the two vertical lines are one inch apart
on the printed drill template. Due to variances in printers, the print size may need to be adjusted if the two vertical lines
are not one inch apart.
