AEM AA24 Series, Installation And Operation Manual

Page: 11 / 22

AA24/AA25 Series Single User Audio Controller
SM18 Installation and Operation Manual
April 14, 2012 Rev: 5.00 Page 2-3
ENG-FORM: 805-0100.DOTX
CONFIDENTIAL AND PROPRIETARY TO ANODYNE ELECTRONICS MANUFACTURING CORP.
2.3.6.2 Power On Checks
Install the AA24 or AA25 and power up the ship’s systems. Verify normal operation of all functions.
Refer to Section 3 for specific operation details.
a) Run through all installed functions, and check the ICS and TX functions for all users.
b) Different headsets models may have significantly different mic characteristics, which will affect
‘VOX’ squelch settings. The David Clark M
-7 mic is much more active than the M-4 or M-1 mics,
and may aggravate headset imbalance if used in a mixed system.
Note: Unusual buzzes, hums or other background audio are symptomatic of multiple grounds, or
noisy external systems such as blowers or pumps sharing wiring with the audio system. Failure
to key or correctly modulate a transmitter is often the result of forgetting to connect all required
grounds to the radio or external audio system.
c) To verify proper operation, all functions and levels should be checked in-flight.
If the unit functions satisfactory, make the required log entries and complete the required
MOT/FAA paperwork, before releasing the aircraft for service.
2.4 Continued Airworthiness
Maintenance of the AA24-001 or AA25-
001 Single User Audio Controller is ‘on condition’ only. Periodic
maintenance of this product is not required.
2.5 Accessories Required But Not Supplied
Both the AA24 and the AA25 Seies Audio Controllers require Installation kit p/n AA24-IKC (crimp) or
AA24-IkS (solder) to complete the installation. They consist of the following:
AA24-IKC 37-pin and 15-pin D-min Female Crimp Kit (AEM Part No. D37S15SL-IKC)
Quantity Description AEM Part #
1 D-min 37 Socket Housing 20-21-037
37 MS Crimp Socket 20-26-901
1* Jack Screw Set 20-27-002
1* Lock Clip Set 20-27-004
1 37 Pin Connector Hood 20-29-038
1 D-min 15 Socket Housing 20-21-015
15 MS Crimp Socket 20-26-901
1* Jack Screw Set 20-27-002
1* Lock Clip Set 20-27-004
1 15 Pin Connector Hood 20-29-015
*Use as required.