3
Read and understand these instructions BEFORE attempting to install this product. Failure to
follow installation instructions and not using the provided hardware may damage the intake
tube, throttle body and engine.
1. Preparing Vehicle
a. Make sure vehicle is parked on level surface.
b. Set the parking brake.
c. If engine has run in the past two hours, let it cool down.
d. Disconnect negative battery terminal.
e. Do not discard stock components after removal of the factory system.
f. Open the air intake kit package and make sure all parts are included.
2. Removal of stock system
a. Fully loosen the 8 screws on the top of the air box. Pull
off the hose on the left & disconnect the hose on the
front of the air box to access & replace the OE filter with
the filter provided in this kit. Reinstall screws and hoses.
b. Disengage the spring clamp retaining the coupler on
the turbo inlet.
c. Disengage the spring clamp retaining the factory in-
take hose to the air box and disconnect the tube from
the air box.
d. Remove the bolt behind the engine securing the fac-
tory intake hose to the engine.
Tools Needed:
8mm Socket
T30 Bit
Socket Driver
Large Needle-Nose Pli-
ers or spring clamp re-
moval tool
