9
t. Reconnect the mass air sensor electrical connection.
u. Reconnect the vehicle’s negative battery cable.Dou-
ble check to make sure everything is tight and properly
positioned before starting the vehicle.
4. Reassemble Vehicle
a. Position the inlet pipes for the best fitment. Be sure that the pipes or any other components do not contact any part
of the vehicle. Tighten the rubber mount, all bolts, and hose clamps.
b. Check for proper hood clearance. Re-adjust pipes if necessary and re-tighten them.
c. Inspect the engine bay for any loose tools and check that all fasteners that were moved or removed are properly
tightened.
d. Reconnect the negative battery terminal and start the engine. Let the vehicle idle for 3 minutes. Perform a final
inspection before driving the vehicle.
5. Service and Maintenance
a. It is recommended that you service your AEM
®
Dryflow™ filter every 20,000 miles for optimum performance. Use
AEM Dryflow cleaning kit part # 21-110.
b. Use aluminum polish to clean your polished AEM
®
intake tube.
c. Use window cleaner to clean your powder coated AEM
®
intake tube.
(NOTE: DO NOT USE aluminum polish on
powder coated AEM intake tubes).
For technical inquiries
e-mail us at
or
call us at
800.992.3000
