aem.eco
LAMBRECHT meteo
|
AEM
|
PRO-WEA
page
–
6
Alternatively the lead can be laid also completely in the pipes of a mast, if the mast is accordingly prepared.
To reduce the risk of inductive interference the sensor must be properly grounded (screening on both
sides).
Heating
The sensor has an electronically controlled 18 W heating within the sensor head. The
heating is supplied together with the sensor electronics. (On request a separate supply
of the sensor electronics and the heating by a fixed cable is possible.)
Under most climatological conditions the heating prevents blocking of the moving sensor parts (see illustration).
The cup rotor or the wind vane are not heated. In case of icing or formation of ice at the moving sensor element the
function is restricted for the period of icing.
Maintenance
The sensor design permits long periods of maintenance-free operation. We therefore recommend a regular visual
verification of the north setup of the wind direction sensor as well as a sensor calibration of both sensor types every
two years. With problems, which cannot solve you, do not hesitate to contact our LAMBRECHT meteo service under:
Tel.: +49-(0)551-4958-0
E-mail: [email protected]
Disposal
LAMBRECHT meteo GmbH is listed and registered at the Stiftung Elektro-Altgeräte Register ear under:
WEEE-Reg.-Nr. DE 45445814
In the category of monitoring and control instruments, device type: “Monitoring and control instruments for
exclusively commercial use”.
Within the EU
The device has to be disposed according to the European Directives 2002/96/EC and 2003/108/EC
(Waste Electrical and Electronic Equipment). Do not dispose the old device in the household waste!
For an environmentally friendly recycling and disposal of your old device, contact a certified disposal
company for electronic waste.
Outside the EU
Please follow the regulations in your country regarding the appropriate disposal of waste electronic equipment.
H
