Ensure that the Audio/Video and Remote Relay
Channel switches on the back of the Receiver
are set to 1.
2.
DG458 - DigiSender® ZX7 - 5.8GHz Quad Input Wireless AV Sender
Please read this instruction manual carefully prior to installation
Page 08
STEP 4 - Install the DigiSender® ZX7 Receiver
The Receiver will pick up the signals being sent by your Transmitter and output them to a connect-
ed TV.
Connect the Power Supply Unit (PSU) to the
socket labelled ‘PSU’ on the Receiver.
3.
Locate a vacant SCART socket on the back of
your receiving TV and insert the DigiSender®
SCART cable.
1.
Connect the Power Supply Unit (PSU) to an
available mains socket and switch on at the back
of the Receiver.
4.
Summary of Contents for DigiSender ZX7
Page 19: ......
