3
14
INTRODUCTION
The DK-2310 is a 9V battery operated 433Mhz wireless keypad designed to work in conjunction
with the receiver for access control. The products from us with receiver include the DA-2311 self-
contained access controller, the AD-2322 controller power pack, and the DA-2800 split-decoded
access controller. It is also compatible with most of the 433Mhz receivers on the market. The keypad
has the flexibility to be positioned anywhere within range of the receiver without the need for wires. Its
4 controlling channels send out the commands to control the outputs and actuate the door bell in the
receiver. It is low power consumption. A 9V alkaline battery gives battery life of 1 year approximately
with 10-30 operations daily.
Remark :
Please see your receiver’s manual for the available output channel(s).
Please see page 15 for the feature brief of the compatible receivers DA-2311, AD2322 and
DA-2800.
SPECIFICATIONS
Operating Voltage : 9V Alkaline Battery
Operating Current : 10uA in Quiescent; 10mA in Transmitting
Operation Temperature : -20 C to +70 C
Environmental Humidity : 5-95% Relative Humidity Non-condensing
Working Environment : Indoor or Outdoor; IP-55, Weatherproof
Number of User Codes : 10 for Each Channel, Total 30 User Code for The 3 O/P Channels
Number of Visitor Codes : 10 Visitor Codes for Output 1
User Code Length : 4-8 Digits, Over 100 Million Combinations
Timing for Code Entry : 10 Seconds
Keypad ID Code : One of the 1 Million ID Codes; Pre-programmed
Operating Frequency : 433Mhz
Maximum Distance : 50 Meters Approximate in Open Space
Dimensions : 126.3(H) X 75.6(W) X 40(D)
Weight : 208g Net
Housing : ABS Plastic
Specifications are subject to change for modification without notice
10 User Codes for output 1 (channel 1)
10 User Codes for output 2 (channel 2)
10 User Codes for output 3 (channel 3)
1 Door Bell Actuator (channel 4)
10 Visitor Codes for output 1
1 Super User Code for operating of all the 3 outputs and making inhibit authorization for output 1
1 Master Code for programming authorization
1 DAP Code 8080 for programming authorization without master code
BACK-LIT ON-OFF SELECTION ( Location 9 )
CLOSE THE PROGRAMMING MODE ( * * )
Always close programming mode with * * to set system back to normal Operation after programming.
VALIDATION
-------------------------------------
System is back to normal operation mode
CODE FOR BACK-LIT MODE
Two codes are available for selection
.
0
--- Back-lit OFF ( Default )
1
--- Back-lit ON
VALIDATION
#
0
or
1
FUNCTION MODES
LOCATIONS
9
The keyboard lights up when a key is pressed, which is convenient for the owner at night. The
illumination is OFF automatically 10 seconds after the last key is pressed and the keypad is left
in rest.
The back-lit function will slightly shorten the battery life.
No back-lit at all. The keypad consumes less power and results in longer battery life.
