Page 4 of 12
CZ21554-01
1. INTRODUCTION
The DataCell D has been designed to give you reliable and accurate data logging of
metering and industrial processes in all environments. Commissioning and data
collection is done locally via the DataCell’s optical port using the Infrared Cable (IRC)
and a notebook PC.
Once installed, the DataCell D should continue to operate without further adjustment
for the expected life of its batteries. Typical operation parameters can be changed by
using the Infra Red Cable and the Connect software suite. This software is available
via internet download from the resources page at
www.DataCell.co
or by contacting
Aegis.
2. INSTALLATION
2.1.
Mounting
The DataCell D is designed to be mounted in an upright position. Select a suitable
mounting location, considering operational issues such as clearances from objects
that may cause physical damage to the unit. Mount the supplied bracket using an
appropriate fixing mechanism ensuring the product is mounted securely and cannot
be dislodged. Fasten the product in place by fixing the supplied screws through the
bracket and into the bracket mounting holes as shown in Fig 2.2.
2.2.
Bottom Panel Layout
1
2
3
4
5
6
6
6
6
Key to Fig 2.2
1. Input 1 programmable input.
2. Input 2 programmable input with protective cap.
3. Input 3 programmable input with protective cap.
4. Input 4 programmable input with protective cap.
5. IRC Receptacle: Infrared communications port.
6. Bracket mounting holes.
