AEGIS
CZ20252
User Guide
12
www.aegis.net.au
Fuse replacement
If the test set still does not work after the battery is replaced, it may due
to a blown fuse.
To replace the fuse:
1. Use a screwdriver to remove the four screws from the battery
compartment.
2. Remove the battery cover
3. Remove the battery
4. Remove the old fuse
5. Insert a same specification (ø5xL20mm, 250mA/250V) of fuse
6. Place the battery and battery cover back, then fasten the four
screws securely.
Maintenance
1. Disconnect clips from any metallic connections before performing
any maintenance.
2. If the CZ20252 fails to operate properly, first replace the
battery/fuse and retest before sending the test set in for repair. (see
Battery Replacement and Fuse Replacement).
3. To clean, wipe carefully with a damp cloth. Ensure product is
completely dry before use. Do not use chlorinated solvents on the
test set.
