Aegis AVP-USB3-PTZ, User Manual

Page: 23 / 27

2
0
POWER ACT: Reset Condition: OFF
0/1 (the camera will move to no. 0/1 preset position after 12 seconds without control since power on), Off
SPEEDBYZ: Reset Condition: On
Only work for IR remote control:
On (when the camera zoom becomes larger, rotation speed comes down), Off
MOUNT MODE: Reset Condition: Up
UP, DOWN
IR M.SPEED: Reset Condition: 16
IR remote control move speed: 5~24
IR Z.SPEED: Reset Condition: 07
IR remote control zoom speed: 1~7
MIN. SPEED: Reset Condition: 0
Minimum start speed for serial command: 0~9
SCAN. SPEED: Reset Condition: 10
Move speed: 4~15
RESET
Move the pointer to the (SET) in the Main Menu, click the
【
HOME
】
and enter the (SET) as follow,
SYS. RESET: System reset: Protocol: VISCA; Address: 1; baud rate: 9600;
Ｒ
S485:Off
CAM. RESET: Camera parameter reset
PT. RESET ： Power action: Off; speed by zone: On; mount mode: Up; IR move speed: 16; IR zoom speed:
7;MIN.SPEED 0;SCAN. SPEED 10
ALL RESET: Reset above 3 items
All of the parameters are reset to factory default except for mount mode and language.
PT SET
＝＝ ＝＝ ＝＝＝ ＝＝＝ ＝＝ ＝＝＝ ＝＝
POWER. ACT Off
SPEEDBYZ On
MOUNT. MODE Up
IR M.SPEED 16
IR Z.SPEED 07
MIN.SPEED 0
SCAN. SPEED 10
BACK ／Ｍ ＥＮ Ｕ
返回 ／Ｍ ＥＮＵ
RESET
＝＝ ＝＝ ＝＝＝ ＝＝＝ ＝＝ ＝＝＝
SYSTEM. RESET NO
CAM.RESET NO
PT. RESET NO
ALL. RESET NO
BACK
／Ｍ ＥＮ Ｕ
Aegis Electronic Group
www.aegiselect.com
For More Information Please Call Aegis Electronic Group, Inc. * (888) 687-6877 Phone * aegis-g2@aegiselect.com * http://www.aegis-elec.com
Aegis Electronic Group
www.aegiselect.com