10
No.
Name
Description
device control.
Note:
The encoder and decoder can be powered by either
a PoE-enabled network switch via this port or power
adapters.
8
Reset LED
Use a pointed stylus to press and hold this key for more
than five seconds until the Reset LED lights up, release
this key, the device reboots and restores to its factory
default.
9
Reset Key
Installation
Note:
Before installation, please ensure the device is disconnected from the
power source.
Steps to install the device in a suitable location:
1.
Attach the mounting bracket to the enclosure using the screws provided in
the package separately. The bracket is attached to the enclosure as
shown.
2.
Repeat step 1 for the other side of the device.
3.
Attach the brackets to the surface you want to hold the unit against using
the screws (provided by others).
