8
Rear Panel
2
1
No.
Name
Description
1
DC 12V
Connect to the power adapter provided.
2
Audio Out
Connect to an audio decoder such as an amplifier for audio
de-embedding output from HDMI source.
3
HDMI In
Connect to an HDMI source device.
4
RS232
Connect this port to a RS232 device such as a computer to
bi-directionally communicate with a RS232 device at the IP
control box or decoder side.
5
IR In
Connect to the broadband IR receiver cable.
6
IR Out
Connect to the IR emitter cable.
7
USB Host
Connect to the USB host device.
8
LAN (PoE)
Connect to a network switch for IP streaming output and
device control.
Note:
The encoder and decoder can be powered by either
a PoE-enabled network switch via this port or power
adapters.
9
Reset LED
Reset key is used to reset device.
Use a pointed stylus to press and hold this key for more
than five seconds until the Reset LED lights up, release
this key, the device reboots and restores to its factory
default.
10
Reset Key
