24
Installation - for contractors
Safety
7.
country-specific safety information
7.1
Observe these installation instructions during installation.
We guarantee trouble-free function and operational reliability only if the original accessories and spare parts intended for the
appliance are used.
instructions, standards and regulations
7.2
!
Risk of damage!
Observe the type plate. The specified voltage must match the mains voltage.
note
Observe the Building and Garage Regulations [or local regulations].
Danger to life through electrocution!
All electrical connection and installation work must be carried out in accordance with VDE regulations
(DIN VDE 0100) [or local regulations], the rules of your local power supply utility, and relevant national and
local regulations.
Danger to life through electrocution!
Never use a permanently installed connecting cable.
The appliance must be able to be separated from the mains power supply by an isolator that disconnects all
poles with at least 3 mm contact separation.
!
Fixing information
Only fit the appliance to a vertical wall that is temperature-resistant to at least 85 °C.
Maintain minimum clearances to adjacent surfaces.
Never install the appliance directly below a wall socket.
important information
Only remove appliance and accessory packaging at the installation location; look out for the separate pack.
When unpacking, ensure that no accessory parts are left in the packaging.
!
important information
When installing the boiler in rooms with a bath and/or shower, observe the safety zone according to VDE 0100,
part 701, in accordance with the details on the appliance type plate.
Danger to life through electrocution!
Install the appliance in such a way that control equipment cannot be touched by a person in the bath or
shower.
installation