20
Operation - for users
Operation
4.
The required room temperature can be infinitely adjusted with the temperature selector. The set temperature of the room air is
then constantly maintained by repeated, brief heating via the thermostat in the appliance.
If you want to use the appliance as a frost stat, turn the temperature selector anti-clockwise as far as it will go. In this position,
the thermostat switches on the heating automatically if the room temperature drops to approx. 6 °C.
!
Switching the appliance oFF
To switch OFF, pull the appliance power plug.
Appliance type controls
4.1
Rotary selector / appliance type
VH 206
VH 227
VH 229
temperature selector
x
x
x
60 min time switch
x
24 hour timer
x
temperature selector
4.2
The required temperature range can be set at the temperature selector. When the room temperature falls below the set value,
full heating output switches on, and when the set room temperature is achieved, it switches off again.
●
5
•
4
•
3
•
2
•
1
*
Temperature selector
26_07_31_0081
60 min time switch
4.3
The appliance operates in two output stages:
1. In controller mode: The temperature selector is operational; the appliance operates with the standard heating output
of 1000 W.
2. In operation with the time switch: The appliance operates with full heating output until the end of the set time. During this
period, the temperature selector is non-operational. After this the temperature selector takes control of the appliance again.
The operating time selected can be interrupted at any point by turning back the time switch.
60 min time switch
26_07_31_0080
●
60
•
5
0
•
4
0
•
3
0
•
2
0
•
1
0
•