A
A
2.
Screw on the ring nut to the hose
and push it into position.
A
3.
The not used vents must be sealed
with supplied covers.
15.3
Load door reversal
WARNING!
Before changing the door
stop, disconnect the mains
plug.
Note regarding contact
protection:
The appliance is
only secure for operations
again once all plastic parts
have been put.
1.
Open load door.
2.
Unscrew hinge
A
from the front of
the appliance and remove the load
door.
3.
Remove cover plates
B
. To do this,
put a thin screwdriver into the slots
as shown in the illustration, push
down lightly and remove the cover
plates.
A
A
B
C
B
4.
Use an applicable tool and apply
pressure to unlock part
C
, remove
and turn it through 180°, then put on
the other side. There is a small spring
below locking block
C
. To put all
parts together correctly, look at the
illustrations:
www.aeg.com
20
Summary of Contents for T75175AV
Page 71: ...РУССКИЙ 71 ...
