10.3
Cleaning the condenser
If the symbol
Condenser
flashes on
the display, inspect the condenser and
its compartment. If it is dirty, clean it.
To inspect:
1.
Open the door.
2.
Open the condenser cover.
3.
Turn 2 levers to unlock the condenser
lid.
4.
Lower the condenser lid.
5.
Catch the handle and pull the
condenser out from the bottom
compartment. Move condenser
horizontally to avoid spilling any
remaining water.
6.
Clean the condenser in vertical
position over a basin. Rinse through
with a hand shower.
7.
Put the condenser back inside the
bottom compartment.
8.
Close the condenser lid.
9.
Lock 2 levers until they snap.
10.
Close the condenser cover.
10.4
Cleaning the drum
WARNING!
Disconnect the appliance
before you clean it.
Use a standard neutral soap detergent to
clean the inner surface of the drum and
drum lifters. Dry the cleaned surfaces
with a soft cloth.
CAUTION!
Do not use abrasive
materials or steel wool to
clean the drum.
10.5
Cleaning the control
panel and housing
Use a standard neutral soap detergent to
clean the control panel and housing.
Use a moist cloth to clean. Dry the
cleaned surfaces with a soft cloth.
ENGLISH
17
