AEG SR 4365 CD, Instruction Manual

Page: 31 / 58

English
31
Overview of the Components
1 Telescopic antenna
2 Handle
3 CD compartment
4 Tab for opening the CD compartment (OPEN/CLOSE)
5 TUNING control with radio scale
6 PLAY/PAUSE button (Play/Pause)
7 SKIP UP button (forward search)
8 REPEAT/PROG button (Repeat/memory)
9 Indicator lamp POWER
10 Indicator lamp (repeat)
11 Indicator lamp (Play/Pause)
12 LED-display
13 Indicator lamp PROG (memory)
14 RANDOM button (random playback)
15 SKIP DN button (reverse search)
16 STOP button
17 VOLUME (volume control)
18 FUNCTION Function selector switch (CD/AUX / OFF /
RADIO)
Back (not shown)
AUX IN connection
AC-IN~ Mains connection
Bottom side (not shown)
Battery compartment
Intended Use
This device is used for
• The reception of radio programmes
• Playing back audio CDs
• Sound playback from external audio sources.
It is intended exclusively for this purpose and may only be
used as such.
It may only be used in the manner described in these instruc-
tions for use. The device must not be used for commercial
purposes.
Any other use of this device is considered to be contrary to
the intended use and may result in damage to materials or
even personal injury.
The firm ETV – Elektro-Technische Vertriebsgesellschaft mbH
does not accept any liability for damage caused as a result of
the use of this device contrary to its intended use.
Start-up of the device/introduction
• Please read the operating instructions carefully before
using the device for the first time!
• Select a suitable location for the device, such as a dry,
flat, non-slip surface on which it is easy to operate the
machine.
• Ensure that the device is sufficiently ventilated!
• Remove the protective film from the display if it is still
present.
Power Supply
1. Ensure that the voltage is the same as that indicated on
the model identification plate.
2. Connect the power cable supplied (see battery compart-
ment if necessary) to a properly installed safety power
socket and the mains connector AC IN~ on the back of
the machine.
Inserting the Batteries (not supplied)
1. Open the lid of the battery compartment on the bottom.
2. Insert 6 batteries of type UM2/R14 1.5 V. Please ensure
that the polarity is correct (see the floor of the battery
compartment)!
3. Then close the battery lid.
NOTE:
When a mains cable is connected the batteries are auto-
matically switched off.
CAUTION:
• Batteries may leak and lose battery acid. If the device is
not used for a longer period of time, remove the bat-
teries.
• Different battery types or new and used batteries must
not be used together.
• Batteries are not to be disposed of together with
domestic wastes. Dispose of the used batteries at the
relevant collection bin or at your dealer’s.
WARNING:
The batteries shall not be exposed to excessive heat such
as sunshine, fire or the like. Danger of explosion!
Transport Safety Device, CD Compartment
1. Open the CD compartment (3) by pulling the lid up-
wards by the tab (4).
2. Before operating the machine for the first time, remove
the transport safety device from the CD player if it is still
in place.
Volume
The desired volume can be sent using the VOLUME regula-
tor (17).
Switch on
After you have set up the power supply, set the function
selector (18) to the desired operating mode. The indicator
lamp POWER (9) lights up.