ENGLISH
40
Buttons on the
Remote Control and Front Panel
1
ST.BY
Switches the system to the standby mode.
2
AC-3/5.1/2.1
Switches between AC3/DTS, 2.1 and
S 5.1.
3
MEMO 1-2-3
For selection of three preset volume levels.
Note:
These preset values cannot be changed.
4
CEN (Center) +/-
With these buttons you can set the volume of the
cent
er
loudspeaker.
5
SUB (Subwoofer) +/-
With these buttons you can set the volume of the
subwoofer.
6
SUR (Surround) +/-
With these buttons you can set the volume of the
surround loudspeakers.
7
/-
Buttons for volume adjustment.
8
MUTE
With this button you can switch off the loudspeakers
temporarily without changing the volume.
Note:
When switching off this function ensure that the
overall volume is not set to maximum!
9
POWER
Mains switch
10
ST.BY
Standby lamp
11
Front +/-
These buttons are used to set the volume of the front
loudspeakers.
Note: Some buttons are located both on the front
panel of the device and on the remote control. The
buttons with the same designation have the same
function.
Initial Operation
Insert the plug in a duly installed 230V/50Hz socket.
1. Switch on your sound source (e.g. DVD player) and
start it.
2. Switch on the subwoofer with the on/off switch on the
front of the device.
3. Use the AC-3/5.1/2.1 button to select the desired
input source.
4. With the /- button you can set the overall
volume.
5. By pressing buttons 4 to 6 on the remote control or
the corresponding buttons on the front of the subwoo-
fer, you can set the volume of the centre, surround
and subwoofer loudspeakers.
6. To stop operation, turn off the subwoofer with the
on/off switch.
Note:
The surround and centre loudspeakers only work
when the system is turned to surround sound.
Technical Data
Model: ................................................................SLS 4705
Power supply: ................................................230 V, 50 Hz
Power outputs
L, R, C, LS, RS: ................................ 5 x 40 W PMPO
Subwoofer:............................................. 300 W PMPO
Signal-to-noise ratio:................................................. 60 dB
FST:
Transmitter
Power supply: .........................................................DC 5 V
Channels: ...................................................................... 16
Frequency range: ...............................2400 ~ 2483,5 MHz
Input level: ....................................................4 V pp (max.)
Output impedance: ...........................................> 10 kOhm
Receiver
Power supply: ................................................230 V, 50 Hz
Channels: ...................................................................... 16
Frequency range: ...............................2400 ~ 2483,5 MHz
Output impedance: .............................................< 1 kOhm
Crosstalk R/L: ........................................................> 15 dB
This device has been tested according to all relevant cur-
rent CE guidelines, such as electromagnetic compatibility
and low voltage directives, and has been constructed in
accordance with the latest safety regulations.
Subject to technical changes without prior notice!
05-SLS 4705 AEG neu2 40
14.02.2006, 9:02:37 Uhr