background image

the COOLMATIC function to chill the

products more rapidly and to avoid

warming the other food which is already

in the refrigerator.

1.

Press the Mode until the

corresponding icon appears.

The COOLMATIC indicator flashes.

2.

Press the OK to confirm.

The COOLMATIC indicator is shown.

The COOLMATIC function shuts off

automatically after approximately 6

hours.
To switch off the function before its

automatic end, repeat the procedure.

The function switches off by

selecting a different fridge

set temperature.

3.7 

Holiday mode

This mode allows you to keep the

appliance closed and empty during a

long holiday period without the

formation of bad odours.

1.

Press the Mode until the

corresponding icon appears.

The Holiday indicator flashes. The

temperature indicator shows the set

temperature.

2.

Press the OK to confirm.

The Holiday indicator is shown.

This mode switches off after

selecting a different

temperature.

3.8 

Door open alarm

An acoustic alarm will sound if the door

is left open for a few minutes. The door

open alarm conditions are indicated by:
• a flashing Alarm indicator;

• an acoustic buzzer.

When normal conditions are restored

(door closed), the alarm will stop. The

buzzer can also be switched off by

pressing any button.

3.9 

ChildLock function

Activate the ChildLock function to lock

the buttons from unintentional

operation.

1.

Press Mode until the corresponding

icon appears.

The ChildLock indicator flashes.

2.

Press OK to confirm.

The ChildLock indicator is shown.

To deactivate the ChildLock function,

repeat the procedure until the ChildLock

indicator goes off.

3.10 

DrinksChill function

The DrinksChill function is to be used to

set an acoustic alarm at the preferred

time, useful for example when a recipe

requires to cool down food products for

a certain period of time.

1.

Press Mode until the corresponding

icon appears.

The DrinksChill indicator flashes.

The Timer shows the set value (30

minutes) for a few seconds.

2.

Press the Timer regulator to change

the Timer set value from 1 to 90

minutes.

3.

Press OK to confirm.

TheDrinksChill indicator is shown.

The Timer start to flash (min).

At the end of the countdown the

DrinksChill indicator flashes and an

audible alarm sounds. Press OK to switch

off the sound and terminate the function.
To switch off the function repeat the

procedure until the DrinksChill goes off.

It is possible to change the

time at any time during the

countdown and at the end

by pressing the Temperature

colder button and the

Temperature warmer button.

3.11 

DYNAMICAIR function

1.

Press Mode until the corresponding

icon appears.

The DYNAMICAIR indicator flashes.

2.

Press the OK to confirm.

The DYNAMICAIR indicator appears.

To switch off the function, repeat the

procedure until the DYNAMICAIR

indicator goes off.

ENGLISH

7

Summary of Contents for SKK8182VDC





















Reviews: