AEG SCE81911TS, User Manual

Page: 31 / 72

8.1 What to do if...
Problem Possible cause Solution
The appliance does not op-
erate. The appliance is switched
off. Switch on the appliance.
The mains plug is not con-
nected to the mains socket
correctly. Connect the mains plug to the
mains socket correctly.
There is no voltage in the
mains socket. Connect a different electrical
appliance to the mains socket.
Contact a qualified electrician.
Audible or visual alarm is on. The cabinet has been re-
cently switched on or the
temperature is too high.
Refer to "High temperature
alarm".
The temperature in the ap-
pliance is too high. Contact a qualified electrician
or contact the nearest Author-
ised Service Centre.
The lamp does not work. The lamp is in stand-by. Close and open the door.
The lamp is defective. Contact the nearest Author-
ised Service Centre.
The compressor operates
continually. Temperature is set incor-
rectly. Refer to "Operation".
Many food products were
put in at the same time. Wait few hours and then check
the temperature again.
The room temperature is
too high. Refer to climate class chart on
the rating plate.
Food products placed in
the appliance were too
warm. Allow food products to cool to
room temperature before stor-
ing.
The door is not closed cor-
rectly. Refer to "Closing the door".
The "FROSTMATIC" or
"COOLMATIC" is switch-
ed on. Refer to "FROSTMATIC func-
tion" or "COOLMATIC func-
tion".
The compressor does not
start immediately after
pressing the "FROSTMAT-
IC" or "COOLMATIC", or af-
ter changing the tempera-
ture. This is normal, no error has
occurred. The compressor starts after a
period of time.
ENGLISH 31