AEG SCE81816TS, User Manual

Page: 33 / 80

Problem Possible cause Solution
The temperature in the ap-
pliance is too high. Contact a qualified electrician
or contact the nearest Author-
ised Service Centre.
A square symbol is shown in-
stead of numbers on the
Temperature Display. Temperature sensor prob-
lem. Contact the nearest Author-
ised Service Centre (the cool-
ing system will continue to
keep food products cold, but
temperature adjustment will
not be possible).
The lamp does not work. The lamp is in stand-by. Close and open the door.
The lamp does not work. The lamp is defective. Contact the nearest Author-
ised Service Centre.
The compressor operates
continually. Temperature is set incor-
rectly. Refer to "Operation".
Many food products were
put in at the same time. Wait some hours and then
check the temperature again.
The room temperature is
too high. Refer to climate class chart on
the rating plate.
Food products placed in
the appliance were too
warm. Allow food products to cool to
room temperature before stor-
ing.
The door is not closed cor-
rectly. Refer to "Closing the door".
The FROSTMATIC is
switched on. Refer to "FROSTMATIC func-
tion".
The COOLMATIC is
switched on. Refer to "COOLMATIC func-
tion".
There is too much frost and
ice. The door is not closed cor-
rectly or the gasket is de-
formed/dirty. Refer to "Closing the door".
The water drainage plug is
not correctly positioned. Position the water drainage
plug in the correct way.
Food products are not
wrapped properly. Wrap the food products bet-
ter.
Temperature is set incor-
rectly. Refer to "Operation" .
ENGLISH 33