AEG SCE72716VM, User Manual

Page: 8 / 20

4.3 Switching on
1. Connect the mains plug to the power
socket.
2. Press the appliance ON/OFF if the
display is off.
The alarm buzzer could operate after few
seconds.
The temperature indicators show the set
default temperature.
To reset the alarm refer to "High
temperature alarm".
To select a different set temperature
refer to "Temperature regulation".
If "dEMo" appears on the display, refer
to "Troubleshooting" chapter.
4.4 Switching off
1. Press the appliance ON/OFF for 5
seconds.
The display switches off.
2. Disconnect the mains plug from the
power socket.
4.5 Switching off the wine
cooler compartment
1. Press Mode until the corresponding
icon appears.
The wine cooler compartment indicators
flash.
The wine cooler compartment
temperature indicator shows dashes.
2. Press OK to confirm.
The wine cooler compartment Off
indicator is shown.
4.6 Switching on the wine
cooler compartment
1. Press Mode until the corresponding
icon appears.
The wine cooler compartment Off
indicator flashes.
2. Press OK to confirm.
The wine cooler compartment Off
indicator goes off.
To select a different set temperature
refer to "Temperature regulation".
4.7 Temperature regulation
Set the temperature of the wine cooler
compartment and of the Freezer
compartment by pressing the
temperature regulators.
The temperature in the wine cooler
compartment can be adjusted between
+6°C and +16°C.
Default temperature settings:
• +10°C for the wine cooler
compartment
• -18°C for the freezer
compartment
The set temperature will be reached
within 24 hours.
After a power failure the set temperature
remains stored.
4.8 FROSTMATIC function
The FROSTMATIC function accelerates
the freezing of fresh food and, at the
same time, protects foodstuffs already
stored from undesirable warming.
1. To activate this function press the
Mode button until the corresponding
icon appears.
The FROSTMATIC indicator flashes.
2. Press the OK button to confirm.
TheFROSTMATIC indicator is shown.
This function stops automatically after
hours.
To switch off the function before its
automatic end repeat the procedure
until the FROSTMATIC indicator turns
off.
The function switches off by
selecting a different set
temperature.
4.9
High temperature alarm
An increase in the temperature in the
freezer compartment (for example due to
an earlier power failure) is indicated by
flashing the alarm icon and freezer
temperature indicators, and sounding of
buzzer.
Press any button.
The buzzer switches off.
The freezer temperature indicator shows
the highest temperature reached for a
few seconds, then displays the set
temperature again.
www.aeg.com 8