10
Operating and indicator panel Freezer
°C
°C
°C
°C
H
I
J
K
L
M N
O
P
ON/OFF
ON/OFF
ALARM OFF
H.
Mains pilot indicator (green)
I.
Freezer button ON/OFF
J.
Temperature setting button (for warmer temperatures)
K.
Temperature display
L.
Temperature setting button (for colder temperatures)
M.
FROSTMATIC function "on" indicator (yellow)
N.
FROSTMATIC button
O.
Alarm reset light
P.
Alarm reset button
Temperature setting buttons
The temperature is adjusted using the “J“ and “L“ buttons. These buttons are
connected to the temperature display.
•
The temperature display is switched over from the display of the ACTUAL
temperature (Temperature display is illuminated) to the display of the DESI-
RED temperature (Temperature display flashes) by pressing one of the two
buttons, “J“ or “L“.
•
Each time one of the two buttons is pressed again the DESIRED temperatu-
re is adjusted by 1 °C. The DESIRED temperature must be reached within 24
hours.
If neither button is pressed, the temperature display automatically switches
back after a short period (approx. 5 sec.) to the display of the ACTUAL tem-
perature.
DESIRED temperature means:
The temperature that has been selected for inside the freezer. The DESIRED
temperature is indicated by flashing numbers.
ACTUAL temperature means:
The temperature display indicates the current temperature inside the freezer.
The ACTUAL temperature is indicated with illuminated numbers.
19
If, after carrying out the necessary checks there is still a fault with your
appliance please contact your local AEGService Force Centre.
In guarantee customers should ensure that the suggested checks have
been made as the engineer will make a charge if the fault is not a
mechanical or electrical breakdown.
Please note that proof of purchase is required for any in-guarantee service
calls.
Changing the Light Bulb
Warning!
There is a risk of electric shocks! Before changing the light
bulb, switch off the appliance and unplug it. Light bulb data: 220-240 V,
max. 25 W
1.
To switch off the appliance, press the
button ON/OFF.
2.
Unplug the mains plug.
3.
To change the light bulb press on the
rear hook and at the same time slide
the cover in the direction indicated
by the arrow.
4.
Change the defective light bulb.
5.
Refit the light bulb cover.
6.
Switch the appliance back on.
Summary of Contents for SANTO C 8 18 43-4I
Page 1: ...SANTO C 9 18 43 4i Integrated Fridge Freezer Operating and Installation Instructions ...
Page 25: ......
Page 26: ......
