AEG S72100WSB1, User Manual

Page: 55 / 60

55 enGLish
16. place the top cover on the top of
the refrigerator and push it to back
side until it is hooked by the fixed
blocks.
17.
Fixed the top cover by the tow
screws.
LeVeLLiNg
the appliance should be level in order
to eliminate vibration. there are 4
height adjustable feet at bottom of the
appliance, 2 feet in the front and 2 feet
in the back. to make the appliance
level, it should be upright and all feet
should be firmly contacted with the
floor.
Warning: reposition, level the
appliance, wait for at least four hours
and then connect it to the power
socket. in case you do not want
to carry out the above mentioned
operations, contact the nearest after
sales service Force.the after sales
service specialist will carry out the
reversibility of the doors at your cost.
Warning: after having reversed
the opening direction of the door
check that all the screws are properly
tightened and that the magnetic seal
adheres to the cabinet if the ambient
temperature is cold (i.e. in Winter),
the gasket may not fit perfectly to
the cabinet. in that case, wait for the
natural fitting of the gasket. lay down
the appliance back side down.
wHaT To Do iF...
warNiNg!
Before troubleshooting,
disconnect the power supply.
only a qualified electrician of
competent person must do the
troubleshooting that is not in
this manual.
imPorTaNT!
there are some sounds during
normal use (compressor,
refrigerant circulation).
Malfunction Possible cause remedy
the wine is too
warm.
temperature is not
properly adjusted.
please look in the “use”
section.
door was open for an
extended period.
open the door only as long as
necessary.
the appliance is near a
heat source.
please look in the “installation”
section.
interior lighting
does not work.
light bulb is defective.
please look in the
“maintenance” section.