background image

• it is advisable to show the freezing in

date on each individual pack to

enable you to keep tab of the storage

time.

6.6

 Hints for storage of frozen

food

To obtain the best performance from this

appliance, you should:
• make sure that the commercially

frozen foodstuffs were adequately

stored by the retailer;

• be sure that frozen foodstuffs are

transferred from the foodstore to the

freezer in the shortest possible time;

• not open the door frequently or leave

it open longer than absolutely

necessary;

• once defrosted, food deteriorates

rapidly and cannot be refrozen;

• do not exceed the storage period

indicated by the food manufacturer.

7.

 CARE AND CLEANING

WARNING!

Refer to Safety chapters.

7.1

 General warnings

CAUTION!

Unplug the appliance before

carrying out any

maintenance operation.

This appliance contains

hydrocarbons in its cooling

unit; maintenance and

recharging must therefore

only be carried out by

authorized technicians.

The accessories and parts of

the appliance are not

suitable for washing in a

dishwasher.

7.2

 Initial power on

CAUTION!

Before inserting the power

plug in to the outlet and

switching on the cabinet for

the first time, leave the

appliance standing upright

for at least 4 hours. This will

assure a sufficient amount of

time for the oil to return to

the compressor. Otherwise

the compressor or electronic

components may sustain

damage.

7.3

 Cleaning the interior

Before using the appliance for the first

time, the interior and all internal

accessories should be washed with

lukewarm water and some neutral soap

to remove the typical smell of a brand-

new product, then dried thoroughly.

CAUTION!

Do not use detergents or

abrasive powders, as these

will damage the finish.

7.4

 Periodic cleaning

CAUTION!

Do not pull, move or

damage any pipes and/or

cables inside the cabinet.

CAUTION!

Take care of not to damage

the cooling system. When

moving the cabinet, lift it by

the front edge to avoid

scratching the floor.

The equipment has to be cleaned

regularly:

1.

Clean the inside and accessories with

lukewarm water and some neutral

soap.

2.

Regularly check the door seals and

wipe clean to ensure they are clean

and free from debris.

3.

Rinse and dry thoroughly.

ENGLISH

11

Summary of Contents for S53520CTW2





















Reviews: