AEG RMB76311NX, User Manual

Page: 33 / 188

ENGLISH 33
Adjusting the doors
• Both left and right doors are equipped
with adjustable axes, which are located
in the lower hinges.
• Before adjusting its doors, please
ensure that the refrigerator is level.
Please review the previous section on
"Leveling appliance". If you find the
top of the doors are uneven, insert the
Allen wrench into the hinge axis, and
turn it clockwise to rise the door or
anticlockwise to lower the door, and
insert an E Ring into the gap.
Allen wrench (Provided)
E Ring
Adjustable part
Location
To ensure appliance’s best functionality,
you should not install the appliance in
the nearby of the heat source (oven,
stoves, radiators, cookers or hobs) or in a
place with direct sunlight. Make sure that
air can circulate freely around the back of
the cabinet.
To ensure best performance, if the
appliance is positioned below an
overhanging wall unit, the minimum
distance between the top of the cabinet
shall be maintained. Ideally, however,
the appliance should not be positioned
below overhanging wall units. One or
more adjustable feet at the base of the
cabinet ensure that the appliance stands
level.
This appliance is not intended to be used
as a built-in appliance.
This appliance should be installed in a
dry, well ventilated indoor position.
This appliance is intended to be used at
ambient temperature ranging from 10°C
to 43°C.
If, due to different installation, proper
v e n t i l a t i o n re q u i re m e n t s a re n o t
respected, the appliance will function
correctly but energy consumption might
increase slightly.
The correct operation of the
appliance can only be guaranteed
within the specified temperature
range.
If you have any doubts regarding
where to install the appliance,
please turn to the vendor, to our
customer service or to the nearest
Authorised Service Centre.
It must be possible to disconnect
the appliance from the mains power
supply. The plug must therefore be
easily accessible after installation.
CAUTION!
If you position the appliance
against the wall, use back spacers
provided or keep the minimum
distance indicated in the installation
instructions.
CAUTION!
If you install the appliance next
to a wall, refer to the installation
instructions to understand the
minimum distance between the
wall and the side of the appliance
where door hinges are to provide
enough space to open the door
when the internal equipment is
removed (e.g. when cleaning).