EN - 33 -
IMPORTANT !
THE FIRST INSTALLATION OF THE APPLIANCE
AND SETTING THE STATIONARY FOOTS
DURING FIRST MOUNTING OF YOUR REFRIGERATOR
* Lay your refrigerator with a small angle to its back after you re-moved the pad lower
*(1) First, set the height of right stationary foot (the hinge side) untilthe distance between
the front side and the ground were 3-3.5cm after that put the refrigerator on a flat and
though ground.
*(2) Make sure the ground is firm and flat otherwise product might stay diagonally
unsecure which might cause opening/ levelling issues at doors.
*(3) After all set other stationary foot (left) until the refrigerator became balanced.
*(4) This tilted back position will allow the doors to self close and seal properly.
Hinge
Turning this way will lift the
product up
Turning this way will lift the
product down
In case of hard closing of the fridge door the freezer door might open for a while due to full
no frost construction structure (free air movement between the compartments). This should
not be considered as a defect.
