AEG Protect C.1000, Operating Instructions Manual, Page: 93 / 128

93
7.1 INITIAL INSTALLATION
7.1.1 SWITCHING ON UPS
Insert the plug of the power cord into the correctly fused power outlet of
your sub-distribution system. The UPS will be immediately supplied
with power from the public power network. It will start up with an
initialization phase, indicated by the AEG logo, which appears on the
screen for 5 seconds. After that, you will see the following message:
Now confirm the highlighted “UPS On” command by pressing “ENTER”.
Hold the key pressed for approx. 1 second. The UPS will synchronize
and switch into normal operating mode after just a few seconds. The
display will switch to the UPS status display.
If there are no keys pressed for 5 minutes, the display will automatically
switch back to the UPS status display. Press “
▲ ” to return.
7.1.2 SWITCHING OFF UPS
If the UPS is in operation, it is possible to access the command above
by pressing “
▲ ” when in the basic UPS status screen. Once you have
confirmed the command again, the UPS will switch off or switch to
bypass (depending on the setting selected).
To enable you to find the “UPS On” or “UPS Off” menu item more easily,
the following symbol appears above the “
▲ ” key.
7. OPERATION AND USAGE
UPS On
UPS Off
Confirm: yes
no