17
EN
The output can be energised even if the UPS is not
connected to the mains supply, as the UPS has its
own internal power supply (battery)!
For reasons of personal protection, the device must
be
properly earthed!
The Protect B.
PRO may only be connected to 220 / 230 / 240 V
AC mains with protective earthing with a VDE-tested mains
connection cable with protective earthing conductor (included in
the scope of supply).
Risk of burns!
The battery exhibits
high short-circuit currents
.
Incorrect connection or errors made while
disconnecting can cause the melting of plug
connections, flying sparks and severe burns!
The device is equipped with a warning signal that is
emitted if the battery power of the Protect B.
PRO
has run out or if the UPS is not operating in its
normal condition.
For continuous operating safety and safe working
with the UPS, heed the following safety precautions:
x
Do not take the UPS apart!
(The UPS does not contain any parts which require regular
servicing. If you open the device, the warranty will become
null and void!)
x
Do not set up the device in direct sunlight or near heat
sources!
x
The device was intended to be set up in heated indoor
rooms. Do not set up the UPS near water or in overly humid
environments!
