7.3
Heat + Hold
Conditions for the function:
• The set temperature is more than 80
°C.
• The function: Duration is set.
The function: Heat + Hold keeps
prepared food warm at 80 °C for 30
minutes. It activates after the baking or
roasting procedure ends.
You can activate or deactivate the
function in the menu: Basic Settings.
1.
Activate the appliance.
2.
Select the heating function.
3.
Set the temperature above 80 °C.
4.
Press again and again until the
display shows: Heat + Hold.
5.
Press
to confirm.
When the function ends, an acoustic
signal sounds.
The function stays on if you change the
heating functions.
7.4
Time Extension
The function: Time Extension makes the
heating function continue after the end
of Duration.
Not applicable to heating
functions with the core
temperature sensor.
1.
When the cooking time ends, an
acoustic signal sounds. Press any
symbol.
The display shows the message.
2.
Press to activate or
to
cancel.
3.
Set the length of the function.
4.
Press
.
8.
AUTOMATIC PROGRAMMES
WARNING!
Refer to Safety chapters.
8.1
Recipes online
You can find the recipes for
the automatic programmes
specified for this appliance
on our website. To find the
proper Recipe Book check
the PNC number on the
rating plate on the front
frame of the appliance
cavity.
8.2
Recipes with Recipe
Automatic
This appliance has a set of recipes you
can use. The recipes are fixed and you
cannot change them.
1.
Activate the appliance.
2.
Select the menu: Recipes. Press
to confirm.
3.
Select the category and dish. Press
to confirm.
4.
Select a recipe. Press
to confirm.
9.
USING THE ACCESSORIES
WARNING!
Refer to Safety chapters.
9.1
Core temperature sensor
There are two temperatures to be set:
the oven temperature and the core
temperature.
The core temperature sensor measures
the core temperature of the meat. When
the meat is at the set temperature, the
appliance deactivates.
CAUTION!
Only use the core
temperature sensor supplied
or the correct replacement
parts.
www.aeg.com
22
