14
15
EN
kes 2 cups then stops making coffee. Fill the bean container and
press the icon (B14). Once the container has been filled, the
appliance makes the 2 remaining cups only to reach the required
number of 4 cups.
If there is not enough water in the tank to complete the requi-
red function or the waste coffee container is full, the appliance
interrupts the process.
To fill the water tank or empty the waste coffee container, you
must remove the jug. This interrupts the programme.
After rectifying the problem, the programme must be started
again.
In this case, you must take the amount of coffee already delive-
red into account to avoid the jug overflowing.
CHANGING JUG FUNCTION PARA-
METERS
The jug programme is factory set with default values.
These can be modified to suit your personal taste and saved.
You can select 5 different types of coffee from extra-mild to
extra-strong and, with the aid of a graphic bar, 10 quantities of
coffee.
To make these adjustments, proceed as follows:
• Press the
icon (B2) to enter the menu. Press the
icons (B7) and (B8) until “PROGRAM JUG” is displa-
yed.
• Press the OK icon (B9) and then the
icons (B7) and
(B8) until “JUG COFFEE TASTE” is displayed.
• Press the OK icon (B9).
• Press the
icons (B7) and (B8) to select a different
coffee taste from extra-mild to extra-strong.
• Confirm the required taste by pressing the OK icon (B9).
• To change the quantity of coffee, press the
icons
(B7) and (B8) until “JUG LEVEL” is displayed.
• Press the OK icon (B9) to confirm.
• A bar representing the quantity of coffee delivered for each
cup is displayed and can be made shorter or longer.
A completely full bar corresponds to the maximum quanti-
ty of coffee per cup.
• When the bar indicates the quantity of coffee required,
press the OK icon (B9) to confirm.
• To change the quantity of cups, press the
icons (B7)
and (B8) until “NR OF CUPS IN JUG” is displayed.
• Select the OK icon (B9) and then press the
icons
(B7) and (B8) to select the number of cups required (4, 6).
“JUG 4 CUPS” or “JUG 6 CUPS” is displayed.
• Press the OK icon (B9) to confirm.
• Press the icon (B6) to exit the programming menu.
CLEANING
Cleaning the coffee maker
Do not use solvents or abrasive detergents to clean the coffee
maker. A soft damp cloth will suffice.
Never wash any of the components of the coffee maker in the
dishwasher.
The following parts of the machine must be cleaned regularly:
• Waste coffee container (A4).
• Drip tray (A14).
• Water tank (A12).
• Coffee (A13), hot water (A11) and cappuccino maker spouts
(A10).
• Pre-ground coffee funnel (A21).
• Inside of the machine, accessible after opening the service
door (A2).
• Brewing unit (A5).
• Coffee jug.
Cleaning the waste coffee container
When “EMPTY WASTE COFFEE CONTAINER” is displayed, the wa-
ste coffee container must be emptied and cleaned.
To clean:
• open the service door on the front of the appliance (fig. 16),
extract the drip tray (fig. 17) and clean.
• Clean the waste coffee container thoroughly.
Important!
When extracting the drip tray, the waste
coffee container must always be emptied.
Cleaning the drip tray
Important!
If the drip tray is not emptied the water
might overflow.
This could damage the machine.
The drip tray is fitted with a level indicator (red) showing the
level of water it contains (fig. 27).
Before the indicator protrudes from the cup tray, the drip tray
must be emptied and cleaned.
To remove the tray:
1. Open the service door (fig. 16).
2. Remove the drip tray and the waste coffee container (fig.
17).
3. Clean the drip tray and waste coffee container (A4).
4. 4. Replace the drip tray and waste coffee container (A4).
