AEG OKO FAVORIT 80800, Service Manual, Page: 13 / 20

Fault Codes continued
TO CLEAR THE FAULT CODE:
The fault code will clear automatically when the dishwasher is turned off.
( but will re-appear if the fault is not repaired)
Fault Fault
Code
LEDs Audible
Alarm
Display Description Symptom
Circulation
Pump
CA Rinsing
Drying
10 times —– Tacho signals are
detected but the
circulation pump should
not be running
Cycle will stop, water
continues until the
pressure switch is
made
Diverter
valve
Cb Rinsing
Drying
End
11 times —– (a) Diverter valve not
in required position
within 4.3 minuets.
(b) Diverter valve
changes position
without selection
from the PCB.
Cycle continues .
Heating steps will be
eliminated.
Program
Error with
Forming
variant
Cf Washing
End
15 times —– Fault within the
electronics. No program selection
possible On/Off-LED
Fault I/O
variant
(input/
Output)
—– —– —– —–
Wrong I/O variant
program I/O component
does not match the
control component. No program selection
possible On/Off-LED