AEG NC7013001, User Manual

Page: 9 / 28

When you connect the appliance to the
electrical supply or after a power cut, the
indicator for the Time function flashes.
Press the or to set the correct
time.
After approximately five seconds, the
flashing stops and the display shows the
time of day you set.
You can only change the time if:
• The child safety device is not on.
• None of the clock functions Duration
or End is set.
• No oven function is set.
5.3
Preheating
Preheat the empty appliance to burn off
the remaining grease.
Preheat the two ovens. Heat
up one oven at a time. Set
the functions listed below, if
applicable.
1. Set the function and the
temperature to 250ºC.
Let the appliance operate for 1 hour.
2.
Set the function and the
temperature to 250ºC.
Let the appliance operate for 15
minutes.
3. Set the function and the
temperature to 250ºC.
Let the appliance operate for 15
minutes.
Accessories can become hotter than
usual. The appliance can emit an odour
and smoke. This is normal. Make sure
that the airflow is sufficient.
6. DAILY USE
WARNING!
Refer to Safety chapters.
6.1 Selecting an oven
1. To switch on the appliance press .
2. Repeatedly press until the top /
main oven indicator appears on the
display.
6.2
Top oven functions
Symbol Oven function Application
Light To activate the lamp without a cooking function.
True Fan Cooking To bake on 1 shelf position and to dry food.
Set the temperature 20 - 40 ºC lower than for Con-
ventional Cooking.
Pizza Setting To bake food on 1 shelf position for a more intensive
browning and a crispy bottom.
Set the temperature 20 - 40 ºC lower than for Con-
ventional Cooking.
Conventional
Cooking To bake and roast food on 1 shelf position.
Slow Cooking To prepare tender, succulent roasts.
ENGLISH 9