English
74
Turning off the Alarm
Press the button (9) to stop the alarm.
Automatic Alarm Interval
• The automatically set alarm function can be shut off for approximately 9 minutes with
the DIMMER / SNOOZE/SLEEP button (4).
• To turn off the alarm function for 9 minutes, you can also pass your hand over the infra
-
red sensors. The distance between your hand and the sensors should be max. 10 cm.
NOTE:
If the Snooze function is activated, the corresponding point at AL1 or AL 2 flashes. The
infrared sensors are then deactivated.
Deactivate the Alarm Function
To deactivate the alarm function, keep the ALARM1 button (2) or ALARM2 button (3)
pressed. The point at AL1 (17) or AL2 (12) disappears.
Delayed Shut-Off
You can use the function for delayed power-off with radio operation. The unit is switched
off automatically when the selected time is reached.
• Select the time after which the unit is switched off by repeatedly pressing the DIMMER
/ SNOOZE/SLEEP button (4). The following selections can be made: 90, 60, 30, and 15
minutes. The OFF setting
deactivates this function.
• This function can be cancelled with the
button (9).
NOTE:
Hold your hand over the infrared sensors for 2 seconds to activate the function
(90 minutes). However, you can only change the time and deactivate the function
using the DIMMER / SNOOZE/SLEEP button.
Summary of Contents for MRC 4121
Page 125: ......
Page 126: ...Stand 12 11 MRC 4121 ...
