AEG LWX8C1612W User Manual Download

Page: 39 / 44

Problem

Possible solution

There is water on the
floor.

• Make sure that the couplings of the water hoses are tight

and there is not water leakages.

• Make sure that the water inlet hose and the drain hose have

no damages.

• Make sure you use the correct detergent and the correct

quantity of it.

You cannot open the ap-
pliance door.

• Make sure that a washing programme that ends with water

in tub, has been selected.

• Make sure that the washing programme is finished.
• Set the drain or the spin programme if there is water in the

drum.

• Make sure that the appliance receives electrical power.
• This problem may be caused by a failure of the appliance.

Contact the Authorised Service Centre. If you need to open
the door, please read carefully "Emergency door opening".

The appliance makes an
unusual noise and vi-
brates.

• Make sure the levelling of the appliance is correct. Refer to

"Installation instruction".

• Make sure that the packaging and/or the transit bolts are

removed. Refer to "Installation instruction".

• Add more laundry in the drum. The load may be too small.

The programme duration
increases or decreases
during programme exe-
cution.

• The ProSense function is able to adjust the programme du-

ration according to the type and the laundry load size. Re-
fer to "The ProSense load detection" in "Daily Use" chap-
ter.

The washing results are
not satisfactory.

• Increase the detergent quantity or use a different deter-

gent.

• Use special products to remove the stubborn stains before

you wash the laundry.

• Make sure that you set the correct temperature.
• Decrease the laundry load.

Too much foam in the
drum during the washing
cycle.

• Reduce the quantity of detergent.

After the washing cycle,
there are some deter-
gent residues in the dis-
penser drawer.

• Make sure that the flap is in the correct position (UP for

powder detergent - DOWN for liquid detergent).

• Make sure you have used the detergent dispenser accord-

ing the indications given in this user manual.

The drum is empty and
the display shows there is
some weight in.

• Press the On/Off button to deactivate the appliance and

activate it again to set a tare.

The drum is full but the
display shows 0.0 kg.

• You loaded the laundry before activating the appliance.

Press the On/Off button to deactivate the appliance.

• Empty the drum and follow the necessary steps. (Refer to

"Loading the laundry")

ENGLISH

Summary of Contents for LWX8C1612W













































Search results

Summary of Contents for LWX8C1612W

Reviews:

Related manuals for LWX8C1612W

Brands by name

Popular brands

AEG LWX8C1612W, User Manual

Search results

Summary of Contents for LWX8C1612W

Reviews:

Related manuals for LWX8C1612W

Brands by name

Popular brands