9. BEFORE FIRST USE
During installation or before
first use you may observe
some water in the appliance.
This is a residual water left
in the appliance after a full
functional test in the factory
to ensure the appliance is
delivered to customers in
perfect working order and is
no cause for concern.
1. Make sure that all transit bolts have
been removed from the appliance.
2. Make sure that the electrical power is
available and the water tap is open.
3. Pour 2 litres of water into the
detergent compartment marked by
.
This action activates the drain system.
4. Pour a small quantity of detergent
into the compartment marked by
.
5. Set and start a programme for cotton
at the highest temperature without
any laundry in the drum.
This removes all possible dirt from the
drum and the tub.
10. PROGRAMMES
10.1 Programme Chart
Programme
Default tempera‐
ture
Temperature
range
Reference
spin speed
Spin speed
range
Maximum
load
Programme description
Eco 40-60 (Wash
only mode)
40 °C
1)
1600 rpm
1600 rpm -
400 rpm
8.0 kg
White cotton and fast-coloured cotton.
Normally soiled items.
Eco 40-60 + Cup‐
board dry level
(Wash & Dry
mode)
40 °C
2)
1600 rpm
1600 rpm -
1000 rpm
5 kg
Eco 40-60 + Cup‐
board dry level
(Dry only mode)
-
5 kg
White cotton and fast-coloured cotton.
Cottons
40 °C
95 °C - Cold
1600 rpm
1600 rpm -
400 rpm
8.0 kg
White cotton and coloured cotton. Nor‐
mally, heavily and lightly soiled items.
www.aeg.com
22