background image

Blue

- Neutral

Brown

- Live

The wire coloured green and yellow must be connected to the termi-
nal marked with the letter «E» or by the earth symbol 

or coloured

green and yellow.

The wire coloured blue must be connected to the terminal «N» or
coloured black.

The wire coloured brown must be connected to the terminal marked
«L» or coloured red.
Upon completion there must be no cut, or stray strands of wire pre-
sent and the cord clamp must be secure over the outer sheath.

Warning! A cut off plug inserted into a 13 amp socket  is a serious safe-
ty (shock) hazard. 
Ensure that the cut off plug is disposed of safely.

Permanent connection

In the case of permanent connection it is necessary that you install a
double pole switch between the appliance and the electricity supply
(mains), with a minimum gap of 3mm between the switch contacts
and of a type suitable for the required load in compliance with the
current electrical regulations.

The switch must not break the yellow and green earth cable at any
point.

GREEN & YELLOW

BROWN

CORD CLAMP

BLUE

13

A

P1041

E

N

L

25

125981081.qxp  2005-04-13  10:49  Page 25

Summary of Contents for LAVATHERM T37400





























Reviews: