1. Open loading door
2. Pull off adhesive strips from inside appli
-
ance on top of drum.
3. Remove foil hose and polystyrene pad
-
ding from the appliance.
Changing door stop
WARNING!
Before changing the door stop, disconnect the mains plug.
1. Open loading door.
2. Unscrew hinge
A
from the front of the
appliance and take off the loading door.
3. Remove cover plates
B
. To do this, in
-
sert a thin screwdriver into the slots as
shown in the illustration, push down
-
wards slightly and pry out the cover
plates.
4. Use an appropriate tool and exert pressure to unfasten locking block
C
from the snap-
on fixture, take out and re-insert on the other side having rotated the block through
180°.
5. Unscrew hinge
A
from the loading door, rotate through 180°, re-insert on the oppo
-
site side and screw down.
6. Re-insert cover plates
B
on the opposite site having first rotated them through 180°.
7. Unscrew cover plates
D
from the front
of the appliance, rotate through 180°,
screw on the opposite side.
8. Unscrew door lock
E
, push down slight
-
ly and remove from the front of the ap
-
pliance.
9. Push snap-in button
F
in and down,
push cover down slightly and remove from front of the appliance.
10. Change door lock
E
over to the opposite side, screw down the door interlock.
11. On the other side, insert cover
F
and allow snap-in button to lock into place.
12. Insert loading door and hinges into recesses on the front of the appliance and screw
down.
Note regarding contact protection:
The appliance is only secure for operations again
once all plastic parts have been inserted.
C
B
B
A
A
E
E
D
D
F
F
84
Installation
Summary of Contents for LAVATHERM 59850
Page 103: ...103 ...
Page 104: ...www aeg electrolux com shop 136910281 00 062010 ...
