AEG LAVAMAT TURBO 12710 VIT Instruction Booklet Download

Page: 10 / 60

Main features of your washer-dryer

• Programme and temperature setting using the programme selector.

•

Stain option

for effectively treating stained washing.

•

Energy saving programme

for normally soiled cotton items.

•

SOAK programme

for heavy soiled items. The machine performs a soak at

30°C. By pressing the DELAY START button the soak time can be prolonged
up to 10 hours max. This programme

cannot

be used with WOOL pro-

gramme. The Soak programme ends with water in the tub. Before selecting
the desired washing programme, drain the water setting the drain pro-
gramme.

•

Speed for the final spin

can be reduced to 900, 700 or 500 rpm.

•

RINSE HOLD

: the laundry is left immersed in the final rinse water to pre-

vent creasing.

•

DELAY START

(

delayed start)

: programme start can be delayed by

30 minutes to 23 hours (e.g. to times with a more economical power
rate).

•

Programme progress display

showing the programme steps selected and

the programme phase which is running.

• Because of its gentle washing action, the

special wool cycle

washes your

garments with extreme care.

•

The drying programmes

will enable you to have dry and soft laundry in a

short time.

•

3-compartment drawer

for detergent and fabric softener.

•

Unbalance detection device:

to prevent vibration during spinning.

132984531.qxd 28/11/2005 16.32 Pagina 10

Summary of Contents for LAVAMAT TURBO 12710 VIT





























































Search results

Summary of Contents for LAVAMAT TURBO 12710 VIT

Reviews:

Related manuals for LAVAMAT TURBO 12710 VIT

Brands by name

Popular brands

AEG LAVAMAT TURBO 12710 VIT, Instruction Booklet

Search results

Summary of Contents for LAVAMAT TURBO 12710 VIT

Reviews:

Related manuals for LAVAMAT TURBO 12710 VIT

Brands by name

Popular brands