background image

Setting up and connection instructions

49

Water Inflow

A pressure hose 1.5m in length is supplied.
If a longer inflow hose is required, only a VDE-approved, complete set 
of hoses with fitted hose screw connections offered by our Customer 
Service is permissible.
– Sets of hoses in lengths of 2.2m, 3.5m and 5m are available for 

washing machines without Aqua-Control. 

– Sets of hoses in lengths of 2.0m, 2.9m and 3.9m are available for 

washing machines with Aqua-Control.

Attention! 

Never cut into pieces in order to extend the hoses!

Sealing rings are supplied either in the plastic 
nuts of the hose screw connection or in the 
enclosed pack. Do not use other seals! 

1.

Connect the hose with the angled connection to 
the machine.

Attention! 

– Do not lay the supply hose 

vertically downwards. Rather, 
turn it to the right or left as 
shown in the diagram.

– Only tighten the screw 

connection manually.

2.

Connect the hose with the 
straight connection to a water tap with a screw 
thread of R 3/4 (inches). 

Attention! 

Only tighten the screw connection 

manually. 

3.

By slowly opening the water tap before putting 
the washing machine into operation, check 
whether the connection is free of leaks.

Summary of Contents for LAVAMAT 76730

























































Reviews: