AEG LAVAMAT 64850L Page 30 User Manual Download

Page: 30 / 36

TECHNICAL DATA

Dimensions

Width / Height / Depth

60 / 85 / 63 mm

Electrical connection

Voltage

Overall power

Fuse

Frequency

220 V

2200 W

10 A

50 Hz

Water supply pressure

Minimum

Maximum

0,5 bar (0,05 MPa)

8 bar (0,8 MPa)

Level of protection against ingress of solid particles and moisture

IPX4

Water supply

Cold water

Maximum Load

Cotton

7 kg

Spin Speed

Maximum

1400 rpm

1) Connect the water inlet hose to a water tap with a 3/4'' thread.

INSTALLATION

Unpacking

All transit bolts and packing must be removed before using the appliance.

You are advised to keep all transit devices so that they can be refitted if the machine ever

has to be transported again.
1.

After removing all the packaging, care-

fully lay machine on it’s back to remove

the polystyrene base from the bottom.

Technical data

Summary of Contents for LAVAMAT 64850L





































Search results

Summary of Contents for LAVAMAT 64850L

Reviews:

Related manuals for LAVAMAT 64850L

Brands by name

Popular brands

AEG LAVAMAT 64850L, User Manual

Search results

Summary of Contents for LAVAMAT 64850L

Reviews:

Related manuals for LAVAMAT 64850L

Brands by name

Popular brands